|
||
|---|---|---|
|
||
|
||
| Rapid Run™ Test Kits & Couplers | |||||||
|---|---|---|---|---|---|---|---|
| RapidRun™ 5-Coax Runner™ Cable (Blue) Test Adapter | |||||||
| Enables a quick continuity check of the Runner cable prior to sealing it within a wall | |||||||
 |
Problems associated with damage during installation however are seldom found until the trim-out or final installation. The RapidRun Runner cable test adapters have been designed to allow an installer to make a quick go-no go test of the Runner cable prior to leaving the job site. These test adapters include two pieces; a shorting plug that connects to the far end of the Runner cable and an RJ45 cable that connects to the input of a common network cable tester. For use with RapidRun™ HT (5-Coax) Runners (color-code blu
|
||||||
| RapidRun™ UXGA Runner™ Cable (Yellow) Test Adapter | |||||||
| Enables a quick continuity check of the Runner cable prior to sealing it within a wall. | |||||||
 |
Even the most experienced installers, however, will run into hazards that damage a cable or have a cable kink during installation. Problems associated with damage during installation however are seldom found until the trim-out or final installation. The RapidRun Runner cable test adapters have been designed to allow an installer to make a quick go-no go test of the Runner cable prior to leaving the job site. These test adapters include two pieces; a shorting plug that connects to the far end of the Runner cable and an RJ45 cable that connects to the input of a common network cable tester.
|
||||||
| RapidRun™ 12-pin Din (5-Coax Blue) Coupler M/M | |||||||
| The male to male DIN coupler is designed to connect two RapidRun (5-Coax) Runners together. | |||||||
 |
|
||||||
| RapidRun™ 15-pin Din (UXGA Yellow) Coupler M/M | |||||||
| Perfect for connecting 2 RapidRun™ UXGA Runner Cables together when you come up short. | |||||||
 |
|
||||||
| RapidRun™ | |||||||
  |
|---|
| 5 Coax Base Cable
UXGA Base Cable
|
|---|
