•  Use in systems where presentation applications using a computer and projector or other large         display are the primary functions
     •  Color-code: Yellow
     •  Compatible with yellow-coded and green-coded Break-Away flying leads and wall plates
     •  Constructed from (3) 28AWG 75Ohm coaxial cables, (3) 24 AWG twisted pairs, and (1) 24AWG         pair.
     •  Coaxial lines feature a 90% shield copper braid for maximum flexibility while protecting against         EMI/FRI
     •  Overall Mylar foil and 85% shield copper braid
     •  CMP rated jacket for use in air plenums and other commercial applications
     •  PVC jacket is softer and more flexible than any VGA cable you’ve every used
     •  Bend radius of less than 3/4in
     •  (2) Protective dust caps with pulling eyes rated to 15lb/ft

Please Note:
Each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate.

RapidRun's™ revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner™ base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals.

RapidRun runner cables are designed to pull through 3/4in conduit including
pre-manufactured 90 degree sweeps.

Note:
90 degree, 3/4in conduit sweeps bent by installers in the field may have smaller diameters than
pre-manufactured sweeps.

Ships: Same Day